UPS F.711
CORROSION INHIBITOR
DESCRIPTION :
UPS F. 711 is soluble in fresh water and highly dispersible in most oil field brines. This compound is a film forming amine, down hole inhibition, salt water disposal, and water injection system.
PRODUCTS FEATURES :
- Surface Active
- Strong Filming Quality
APPLICATION BENEFITS :
- Aids in reduction of formation plugging
- Effective in most corrosion protection programs
- Provides thorough corrosion inhibitor
PHYSICAL PROPERTIES :
Specific gravity @ 60 ºF : 0.92
Solubility : Fresh water soluble
Brine water dispersible
Density @ 60 ºF : 7,7 lb / gal
Apperance : Light yellow
pH : 7,7
Pour Point : -10 º F
Flash Point : <73 º F
APPLICATION :
UPS F. 711 is recommended for continuous injection in producing wells. Disposal wells, and water injection systems. Typical treating rates range from 15 – 30 ppm, depending upon the severity of the corrosive environment. UPS F. 711 has proven effective in batch treating programs and squeeze applications. Normally, one to three drums of UPS F. 711 are mixed with ten barrels of produced fluids and pumped down the tubing or annulus. This is followed by approximately 150 barrels of produced fluids fluids for displacement of the chemical into the formation. Shut well in overnight for maximum adsorption.
HANDLING PRECOUTIONS :
Avoid eye contamination with this product. In case of eye contact, flush immediately with large amount of frees water. Consult physician. Keep chemical away from sparks or open flame.
